Contact

2018-03-25 10758 0

For Authors

Instructions for Authors Presentations

Instructions for Authors of Oral Presentations

In order to ensure a smooth course during the session, we kindly ask presenting authors to consider the following:
You can find the time allocated for your presentation from the program (the given time incl. 3 min. discussion) for regular presentations.
Session chairs will rigorously enforce the schedule, i.e., to strictly limit the length of a presentation. We kindly ask you for your understanding and for your cooperation in keeping the schedule.
Please be at the the room of your session 15 minutes before session start, so that you can meet your session chairs and the other speakers in advance.
A video projector and a notebook (Fujitsu-Siemens LIFEBOOK E8210) -will be available in all conference rooms. The presentation format in the conference rooms is 16:9, but of course the Format 4:3 will be also possible). The use of personal notebooks has to be announced in advance.

Attention

Please bring your presentations on a USB memory stick in MS-PowerPoint or Adobe PDF format to BMT 2018 and submit it in the conference room where you will have your presentation at least 1 hour prior to your talk!

In order to avoid any problems with your presentation please make sure that it fulfills the necessary requirements for the following software:

  • MS Office Version 2007 Standard (Word, Excel, PowerPoint)
  • Windows Mediaplayer 11
  • Adobe Acrobat Reader 8

Video Codecs:

  • Windows Standard Codecs
  • DivX, XviD - FFDShow 17.02.2005 Alpha
  • MPEG 2.0.0.0
  • Quicktime Codec
  • Real Codec

Audio Codecs:

  • Windows Standard Codecs
  • OGG Vorbis 0.9.9.5
  • AC3 1.01.

Preparation room for authors:

If you need to make last minute changes or check your presentation, laptops will be at your disposal in the Seminar Room S08 (second level).

Instructions for Authors of Poster Presentations

When preparing the poster, presenters should have in mind the objective of capturing the interest of attendees to the work that is being presented. The quality of the presentation stimulates the attention of the audience and improves the overall satisfaction of the community attending the conference. Use an appropriate font size allowing posters to be readable by delegates 1.5 m away.

The poster message should be clear and understandable without oral explanation. Further, we would like to call the attention of poster presenters to the following items:

  • Each poster board will be marked with a poster ID-number (you can find your poster number from the posters list below).
  • Authors are requested to use only the boards provided for their poster.
  • Posters can be put on the board starting by Thursday, September 26, 09:00 latest by 12:00 h the day of the poster presentation.
  • Posters should be fixed to the poster board using pins which will be provided at the registration desk.
  • In order to give all the delegates the chance to visit the poster sessions, we will have two poster sessions: On Wednesday, September 26 from 13:40-15:10 and on on Thursday, September 27 from 13:40-15:10. So please don't remove your poster after the first poster session!
  • The poster boards will be placed in the foyer ground floor and in the foyer 2nd floor.
  • Authors are required to stand by their posters during both poster sessions and to remove their posters from the boards after the last sessions on Friday, September 28, at the latest. Posters left on the boards after that will not be returned to the authors.
  • We recommend a poster in DIN A0 size portrait format (approx. 100 140 cm).

Poster Presentations Number

P01 Implementation of open-porous load-bearing structures for the improvement of the primary stability of acetabular press-fit cups
Volker Weißmann (University of Applied Sciences Technology, Business Design, Germany); Rainer Bader (Universität Rostock, Germany); Harald Hansmann ( of Applied Science, Technology, Business and Design Wismar, Germany); Christian Boss (Institute for e. V., Germany)
 
P02 Heart rhythm model for the simulation of electric fields in transesophageal atrial pacing and cardiac resynchronization therapy
Kerem Göküs (University of Applied Sciences Offenburg, Germany); Matthias Heinke (University of Applied Sciences Offenburg & Department of Electrical Engineering and Information Technology, Germany); Johannes Hörth (University of Applied Sciences Offenburg, Germany)
 
P03 Testing of dynamic wrist joint external fixator mobility and reaction moment
Heiner Martin (Universität Rostock, Germany); Michael Stiehm (University of Rostock & Germany, Germany); Ingmar Rinas (University Medical Centre Rostock, Surgical Clinic, Germany); Niels Grabow and Thomas Mittlmeier (Universität Rostock, Germany)
 
P04 Quantification of environmental influences and interferences affecting an active lens implant
Liane Koker (Karlsruhe Institute of Technology, Germany); Matthias Stoll (Fa. , Germany); Ulrich Gengenbach (Karlsruhe Institute of Technology & Campus North, Germany); Georg Bretthauer (Karlsruhe Institute of Technology, Germany)
 
P05 Detecting Lamellipodia in Epithelial Cell Clusters Using a Fully Convolutional Neural Network
Simon Gruetzmacher (Reutlingen University, Germany); Ralf Kemkemer (Max Planck Institute for Medical Research & Reutlingen University, Germany); Christian Thies and Cristobal Curio (Reutlingen University, Germany)
 
P06 CurvChip - chip platform for investigating cell responses to curved surface features
Kerstin Frey and Alena Fischer (Reutlingen University, Germany); Rumen Krastev (Reutlingen University & NMI Natural and Medical Sciences Institute at the University of Tübingen, Germany); Ralf Kemkemer (Max Planck Institute for Medical Research & Reutlingen University, Germany)
 
P07 Sonographic Detection of Iron Oxide Nanoparticles Employing Shear Waves
Michael Fink (Friedrich-Alexander-University Erlangen-Nuremberg, Germany); Stefan (University Hospital Erlangen, Germany); Christoph Alexiou (University Hospital Erlangen & University Hospital Erlangen, Germany); Helmut Ermert (Friedrich-Alexander-University Erlangen-Nuremberg, Germany)
 
P08Single trial classification of invasively recorded auditory evoked potentials in cochlear implant user
Günther Bauernfeind (Hannover Medical School & Cluster of Excellence Hearing4all, Germany); Martin Bleichner (University Oldenburg, Germany); Magnus Teschner (Hannover Medical School & Cluster of Excellence Hearing4all, Germany); Stefan Debener (University of Oldenburg, Germany); Thomas Lenarz (Medizinische Hochschule Hannover, Germany); Sabine Haumann (Hannover Medical School & Cluster of Excellence Hearing4all, Germany)
 
P09 Histological Image Processing for the Assessment of Tissue Engineered Cartilage
Fabian Och and Ulla Wenzel (Ulm University of Applied Sciences, Germany); Katja Hasch and Eva Goldberg-Bockhorn (University Medical Center, Ulm, Germany); Nicole Rotter (Mannheim University Medical Center, Germany); Martin Hessling (Hochschule Ulm - University of Applied Sciences, Germany); Michael Munz (Ulm University of Applied Sciences, Germany)
 
P10 Vascular response towards biodegradable sirolimus-eluting polymeric scaffolds in the porcine model
Sabine Kischkel (University of Rostock, Germany); Carsten Bünger (Vivantes Humboldt-Klinikum, Germany); Anja Püschel (Rostock University Medical Center, Germany); Klaus-Peter Schmitz, Wolfgang Schareck and Niels Grabow (Universität Rostock, Germany)
 
P11 A treatment monitoring application for whole body PET imaging

Laveena Kewlani (Technical University of Munich & INKA Katheter, Germany); Stephan Nekolla (Klinikum Rechts der Isar, Germany)
 
P12 A methodical approach for integrating end-user usability evaluations into the procurement process of medical devices

Lorenz Müller and Claus Backhaus (FH Münster, Germany)
 
P13 Improving electrocorticograms of awake and mice using wavelet denoising
Michael Schweigmann (University of the Saarland & Trier University of Applied Sciences, Germany); Fabian Auler (Trier University of Applied Sciences, Germany); Frank Kirchhoff (University of the Saarland, Germany); Klaus Peter Koch (Trier University of Applied Sciences, Germany)
 
P14 Characterization of Acoustic Properties of Poly-(L)-lactic Acid Nanoparticles in terms of Inertial Cavitation

Pia-Theresa Hiltl, Michael Fink, Astrid Hofmann and Helmut Ermert (Friedrich-Alexander-University Erlangen-Nuremberg, Germany); Stefan Johann Rupitschversity of Erlangen Nuremberg, Germany); Geoffrey Lee (Friedrich-Alexander-University Erlangen-Nuremberg, Germany)
 
P15 Cryoballoon model and simulation of catheter ablation for pulmonary vein isolation in atrial fibrillation

Robin Müssig (Hochschule Offenburg, Germany); Matthias Heinke (University of Applied Sciences Offenburg & Department of Electrical Engineering and Information Technology, Germany); Johannes Hörth (University of Applied Sciences Offenburg, Germany)
 
P16 Development of a graphical user interface
manufacturer adaptation of a program for determining the pulse wave velocity in the aorta from phase-contrast magnetic resonance images
Constantin Schareck (University of Luebeck, Germany); Thekla Oechtering and Alex Frydrychowicz (Universitätsklinikum Schleswig-Holstein, Germany); Martin A. Koch (University of Lübeck, Germany)
 
P17 Reconstruction of the Excitation Origin Region of Focal Ventricular Tachycardia with the ECG
Nicolas Pilia and Olaf Doessel (Karlsruhe Institute of Technology (KIT), Germany)
 
P18 Biphasic parameter identification of equine articular cartilage from creep indentation data using an optimized 3D FE-based method
Thomas Reuter (ICM-Institut Chemnitzer Maschinen- und Anlagenbau, Germany); Christof Hurschler (Medizinische Hochschule Hannover (MHH), Germany)
 
P19 Comparison of biphasic material properties of equine articular cartilage from stress relaxation indentation tests with and without tension-compression nonlinearity
Thomas Reuter (ICM-Institut Chemnitzer Maschinen- und Anlagenbau, Germany); Christof Hurschler (Medizinische Hochschule Hannover (MHH), Germany)
 
P20 Development of a tissue model to simulate extravasation
Niels Hinricher, Claus Backhaus and Leonard Pawelzik (FH Münster, Germany)
 
P21 Molecular processes of corneal collagen cross-linking in keratoconus therapy
Steven Melcher (TU Dresden, Germany); Eberhard Spörl (University Hospital Carl Gustav Carus, TU Dresden, Germany); Edmund Koch (Technische Universität Dresden, Germany); Gerald Steiner (Clinical Sensoring and Monitoring, Germany)
 
P22 Advanced characterization of particles and cells in a laser flow cytometer by angular-resolved light scattering
Martin Hussels, Dirk Grosenick, Jörg Neukammer, Jonas Gienger and Hermann Groß (Physikalisch-Technische Bundesanstalt (PTB), Germany)
 
P23 3D reconstruction of thyroid ultrasound images segmented using k-means clustering

Prabal Poudel (Otto-von-Guericke-Universität Magdeburg, Germany); Alfredo Illanes (Otto-von-Guericke University of Magdeburg, Germany); Michael Friebe (Otto-von-Guericke-Universität, Germany)
 
P24 Determination of tissue optical properties from spatially resolved diffuse reflectance
Dirk Grosenick and Thomas (Physikalisch-Technische Bundesanstalt (PTB), Germany); Andreas Pohlmann and Thoralf Niendorf (Max Delbrueck Center for Molecular Medicine, Germany); Kathleen Cantow, Sarah Brix, Bert Flemming and Erdmann Seeliger (Institut für Vegetative Physiologie, Charité Universitätsmedizin Berlin, Germany)
 
P25 Determination of spatiotemporal gait parameters from different sensor configurations
Bernhard Penzlin (RWTH Aachen University, Germany); João Pedro Batista, Jr and Cornelius Bollheimer (RWTH Aachen University Hospital, Germany); Jonas Nienhaus (RWTH Aachen University, Germany); Steffen Leonhardt (RWTH Aachen, Germany)
 
P26 Influence of additives on properties of electrospun poly(L-lactide)
Daniela Arbeiter (Universität Rostock, Germany); Stefanie Kohse (University Medical Center Rostock, Germany); Thomas Eickner (University of Rostock, Germany); Klaus-Peter Schmitz and Niels Grabow (Universität Rostock, Germany)
 
P27 Design and Evaluation of a Mechanism Modelling CSF Resorption for In-Vitro Simulation

Stefan Stürmer and Anne Benninghaus (RWTH Aachen University, Germany); Steffen Leonhardt and Klaus Radermacher (RWTH Aachen, Germany)
 
P28 Increased baroreflex sensitivity in a patient with hereditary spastic paraplegia - type SPG11 - A case report
Gerald Fischer (UMIT - University for Health Sciences, Medical Informatics and Technology & AFreeze GmbH, Austria); Jürgen Fortin (CN-Systems Inc., Austria); Sara Baumgartner Sigl (University Hospital Innsbruck, Austria); Daniel Baumgarten (UMIT - University for Health Sciences, Medical Informatics and Technology, Austria & Technische Universität Ilmenau, Germany)
 
P29 Non-invasive reconstruction of atrial ectopic activity using a basis of body surface potentials
Steffen Schuler, Axel Loewe and Olaf Doessel (Karlsruhe Institute of Technology (KIT), Germany)
 
P30 A Model of Cerebral Collateral Circulation for Evaluation of Blood Flow in Case of M1-Stenosis
Yannick Lutz, Lorena Krames and Axel Loewe (Karlsruhe Institute of Technology (KIT), Germany); Giorgio Cattaneo (Acandis GmbH, Pforzheim, Germany); Olaf Doessel (Karlsruhe Institute of Technology (KIT), Germany)
 
P31 Concept of a and freely configurable patient table for CT applications
Mathias Leopold (Otto von Guericke University Magdeburg, Germany); Thomas Hoffmann (Otto-von Guericke University Magdeburg, Germany); Klemens Opfermann (Otto von Guericke University, Germany); Enrico Pannicke (Otto-von-Guericke University Magdeburg, Germany); Elmar Woschke (Otto von Guericke University, Germany); Georg Rose (OVGU, Germany)
 
P32 Development of biodegradable stents for the treatment of Eustachian tube dysfunction
Kerstin Schümann (Rostock University Medical Center, Germany); Tamara Wilfling (Hannover Medical School, Germany); Gerrit Paasche (Medizinische Hohule Hannover, Germany); Robert Schuon (Hannover Medical School, Germany); Wolfram Schmidt (Universität Rostock, Germany); Heinz Müller and Carsten Momma (CORTRONIK GmbH, Germany); Klaus-Peter Schmitz (Universität Rostock, Germany); Thomas Lenarz (Medizinische Hochschule Hannover, Germany); Niels Grabow (Universität Rostock, Germany)
 
P33 Enhanced language mapping in awake brain surgery by using intraoperative optical imaging
Martin Oelschlägel (Klinik und Poliklinik für Neurochirurgie, Universitätsklinikum Carl Gustav Carus, Dresden, Germany); Stephan Sobottka, Matthias Kirsch and Gabriele Schackert (Klinik und Poliklinik für Neurochirurgie, Universitätsklinikum Carl Gustav Carus, Dresden); Ute Morgenstern (Institut für Biomedizinische Technik, Technische Universität Dresden, Dresden)
 
P34 Impact of anatomical variations on insertion forces - An investigation using artificial cochlear models -
Silke Hügl (Department of Otorhinolaryngology, Hannover Medical School, Hannover, Germany); Tobias Blum (Hannover Medical School, Germany); Thomas Lenarz (Medizinische Hochschule Hannover, Germany); Omid Majdani and Thomas S. Rau (Hannover Medical School, Germany)
 
P35 Novel hot-wire based spirometry is highly accurate at low flow rates

Petra Friedrich (Hochschule Kempten, University of Applied Sciences, Germany); Rosina Ledermüller (PARI GmbH, Germany); Arshan Perera (Pari GmbH, Germany)
 
P36 Automatic identification for medical instruments - development and proof of concept of a memory chip based solution
Friederike Redemann (Hochschule Mannheim University of Applied Sciences, Germany); Thilo Krüger (Inomed Medizintechnik GmbH, Germany); Oliver (Inomed Medizintechnik, Germany); Jürgen Wangler (Inomed Medizintechnik GmbH, Germany)
 
P37 MEMS Needle Electrode for Impedance Spectroscopy on Cell Spheroids
Stefan Hanitsch and Martin Hoffmann (Technische Universität Ilmenau, Germany); Uwe Pliquett (Institute for Bioprocessing and Analytical Measurement Techniques, Germany); Stefan Sinzinger (Technische Universität Ilmenau, Germany)
 
P38 Lossless and Lossy Compression of Neural Signals with Predictor Schemes on in-vitro and in-vivo Pre-Recorded Signals
Matteo Pagin (University of Ulm, Germany); Florian Jetter (Natural and Medical Sciences Institute at University of Tuebingen, Germany); Günther Zeck (NMI at the University Tuebingen, Germany); Maurits Ortmanns (University of Ulm, Germany)
 
P39 Chip-based sensing of glycosylphosphatidylinositol-anchored proteins in complex with phospholipids and correlation to metabolic states
Günter Müller (Helmholtz Center Munich & Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH), Germany)

 
P40 MATLAB Simulation Environment for Estimating the Minimal Number and Positions of Cameras for 3D Surface Reconstruction in a Fully-Digital Surgical Microscope
Andreas Wachter and Jan Kost (Karlsruhe Institute of Technology (KIT), Germany); Werner Nahm (Karlsruhe Institute of Technology, Germany)
 
P41 Electrophoretic deposition of film on stimulation electrodes for the use in intraoperative neuromonitoring
Karin Chen (University of Stuttgart, Germany); Johanna Oswald and Thilo Krüger (Inomed Medizintechnik GmbH, Germany)
 
P42 Interface Adhesion in Flexible Micromedical Devices
Helen Steins (NMI Natural and Medical Sciences Institute, Germany); Lena Bleck (NMI Natural and Medical Sciences Institute at the University of Tübingen, Germany); Rene P. von Metzen (NMI Natural and Medical Sciences Institute, Germany)
 
P43 Comparing distance measures on assessed medical device incident data using Average Silhouette Width
Christian Bayer (Federal Institute for Drugs and Medical Devices, Germany); Robin Seidel (Federal Institute for Drugs and Medical Devices BfArM & Research Division, Germany)
 
P44 Investigation of balloon dilation devices for treatment of Eustachian tube dysfunction
Julia Schubert (Rostock University Medical Center, Germany); Tamara Wilfling (Hannover Medical School, Germany); Kerstin Schümann (Rostock University Medical Center, Germany); Gerrit Paasche (Medizinische Hochschule Hannover, Germany); Niels Grabow and Klaus-Peter Schmitz (Universität Rostock, Germany); Thomas Lenarz (Medizinische Hochschule Hannover, Germany); Wolfram Schmidt (Universität Rostock, Germany)
 
P45 Design Evaluation of Bipolar Electrodes for Promontory Stimulation
Jennifer Biendara (Hochschule Offenburg, Germany); Celine Wegner and Thilo Krüger (Inomed Medizintechnik GmbH, Germany)
 
P46 Distribution of the Electromechanical Delay in the Heart Muscle: a Study on a Simple Geometry
Ekaterina Kovacheva (Karlsruhe Institute of Technology (KIT), Germany); Lukas Baron (Karlsruher Institut für Technologie (KIT), Germany); Olaf Doessel and Axel Loewe (Karlsruhe Institute of Technology (KIT), Germany)
 
P47 Real-Time Streaming of 3D Ultrasound Data to HoloLens
Felix von Haxthausen and Floris Ernst (University of Lübeck, Germany); Ralf Bruder (University of Luebeck, Germany); Veronica Garcia Vazquez (University of Lübeck, Germany)
 
P48 In vitro bio-stability screening of novel implantable polyurethane elastomers. Morphological design and mechanical aspects
Larysa Kutuzova, Kiriaki Athanasopulu, Markus Schneider and Andreas Kandelbauer (Reutlingen University, Germany); Ralf Kemkemer (Max Planck Institute for Medical Research & Reutlingen University, Germany); Günter Lorenz (Reutlingen University, Germany)
 
P49 Multiobjective Optimization Routine for the Parameterization of the HGO Material Model for Abdominal Aneurysm Wall
Tissue Based on Uniaxial Testing
Achim Hegner (Frankfurt University of Applied Sciences, Germany); Andreas Wittek (Frankfurt University of Applied Sciences & University of Siegen, Germany); Stefan Dominico (Frankfurt University of Applied Sciences, Germany); Christopher Blase (Frankfurt University of Applied Sciences & Goethe University Frankfurt, Germany)
 
P50 Balloon-based measuring system for compliance investigations
Carsten Tautorat and Kerstin Schümann (Rostock University Medical Center, Germany); Olaf Specht (Universität Rostock, Germany); Frank Kamke (University Medical Center Rostock, Germany); Peter Behrens, Klaus-Peter Schmitz, Niels Grabow and Wolfram Schmidt (Universität Rostock, Germany)
 
P51 Visualization of biomechanical model parameters by adapting methods from game development
Tobias Bolten, Andre Kürten and Andreas Kitzig (Niederrhein University of Applied Sciences, Germany); Edwin Naroska (University of Applied Sciences Niederrhein, Germany)
 
P52 Multi-functional Test-Setup to Characterize the Mechanical Properties of Human Hair
Günther Benderoth, Achim Hegner and Armin Huß (Frankfurt University of Applied Sciences, Germany); Mounir Jebabli, Yacine Achour and Nahid Miah (Computer Sciences and Engineering, Germany)
 
P53 CT and IR Perfusion Measurement: Do They Match?
Igor Fischer (Heinrich-Heine University, Germany); Bernd Turowski, Jan Cornelius, Philipp Slotty, Athanasios Petridis, Hans-Jakob Steiger and Marcel Kamp (Heinrich Heine University, Germany)
 
P54 Modern orthotic design requires state of the art modular custom measurement techniques for evaluation
Lucien Opitz, Maxim Kirillov and David Hochmann (University of Applied Sciences Muenster, Germany)
 
P55 Synchronized presentation of a language task to the electrical stimulation of cortical regions during speech mapping in an awake surgery

Laura Hansmeyer (Goethe University Frankfurt & Inomed Medizintechnik GmbH, Germany); Thilo Krüger (Inomed Medizintechnik GmbH, Germany)
 
P56 Inverse dynamics simulation to optimize ergometer cycling after hip replacement
Maike Sauerhoff (University of Bochum, Germany)

 
P57 Pacing electrode and simulation of cardiac contractility modulation
Tom Roller (University of Applied Science Offenburg, Germany); Matthias Heinke
(University of Applied Sciences Offenburg & Department of Electrical Engineering and Information Technology, Germany); Johannes Hörth (University of Applied Sciences Offenburg, Germany)
 
P58 Efficient feature-based motion estimation in neurosurgery using non-maximum suppression
Fang Chen, Jan Müller and Jens Müller (TU Dresden, Germany); Ronald Tetzlaff (Technische Universität Dresden, Germany)
 
P59 Concept of an open interface CT for hybrid imaging
Thomas Hoffmann (Otto-von Guericke University Magdeburg, Germany); Mathias Leopold (Otto von Guericke University Magdeburg, Germany); Shiras Abdurahman (Otto-von Guericke University, Germany); Georg Rose (OVGU, Germany)
 
P60 Visualization of interfacial defects at dental restorations with spectral domain and polarization sensitive optical coherence tomography
Florian Tetschke (TU Dresden, Germany); Jonas Golde (TU Dresden, Faculty of Medicine Carl Gustav Carus, Germany); Julia Walther (University of Technology Dresden, Germany); Lars Kirsten (Technische Universität Dresden, Germany); Claudia Rüger and Hartmut Schneider (University of Leipzig, Germany); Edmund Koch (Technische Universität Dresden, Germany); Rainer Haak (University of Leipzig, Germany); Christian Hannig (TU Dresden, Faculty of Medicine Carl Gustav Carus, Germany)
 
P61 Feasibility of Promontory Stimulation recording in cochlear implant candidates with clinical system: An update
Daniel Polterauer (Klinikum der Universität München, Germany); Giacomo Mandruzzato (MED-EL GmbH, Austria); Maike Neuling (Klinikum der Universität München, Germany); Marek Polak (MED-EL GmbH, Austria); Joachim Müller and John-Martin Hempel (Klinikum der Universität München, Germany)
 
P62 An automatic detector of intracranial epileptic spikes based on classification of EEG epochs
Daniel Lachner-Piza (Universitätsklinikum Freiburg & Albert-Ludwigs-Universität Freiburg, Germany); Jonas Bruder, Julia Jacobs and Andreas Schulze-Bonhage (University Hospital Freiburg, Germany); Thomas Stieglitz (Albert-Ludwigs-Universität Freiburg, Germany); Matthias Dümpelmann (University Hospital Freiburg, Germany)
 
P63 Rotational activity around fibrotic tissue during Atrial Fibrillation
Mark Nothstein (Karlsruhe Institute of Technology, Germany); Olaf Doessel and Axel Loewe (Karlsruhe Institute of Technology (KIT), Germany)
 
P64 3D Tumor Models Based on Histologic Data for Magnetic Drug Targeting
Max Lindemann (RWTH Aachen University, Germany); Anjali Röth (RWTH Aachen University Hospital, Germany); Thomas Schmitz-Rode (Institute of Applied Medical Engineering AME, RWTH Aachen University, Germany); Ioana Slabu (RWTH Aachen University, Germany)
 
P65 Initial results on energy harvesting by exploiting the temperature gradient in hip implants
Thomas Sühn (Otto-von-Guericke-University Magdeburg & Institute of Medical Technology, Germany); Joachim Döring, Jessica Bertrand, Christoph Lohmann, Sagar Shetty and Axel Boese (Otto-von-Guericke-University Magdeburg, Germany); Michael Friebe (Otto-von-Guericke-Universität, Germany)
 
P66 A Customized Highly Linear Power Resistor For Distortion Measurements in a Magnetic Particle Imaging Signal Chain
Jan Stelzner, Jonas Beuke, Huimin Wei and Thorsten M. Buzug (Universität Lübeck, Germany)
 
P67 Linear stability analysis of epileptic seizure models
Steffen Hartmann (Ansbach University of Applied Sciences, Germany); Dennis Adamski (University of Applied Science Ansbach, Germany); Bastian Seifert and Christian Uhl (Ansbach University of Applied Sciences, Germany)
 
P68 Multiclass sEMG signal processing and classification for upper-limb FES-NP control
Cinthya Toledo (Instituto Nacional de Rehabilitación, Mexico); Eloisa Flores (Universidad Autónoma Metropolitana, Mexico); Jorge Mercado (Instituto Nacional de Rehabilitación, Mexico); Pilar Castellanos (Universidad Autónoma Metropolitana, Mexico); Josefina Gutierrez (Instituto Nacional de Rehabilitacion LGII, Mexico)
 
P69 Brain-pressure sensor for esophageal pressure measurement during magnetic stimulation in rats
Christin Wenzel (University Medical Center Freiburg, Germany); Sashko Spassov and Stefan Schumann (University Medical Center of Freiburg, Germany)
 
P70 Systematic analysis about residual chloroform removal from PCL films
Michael Teske (University Medical Center Rostock, Germany); Daniela Arbeiter (Universität Rostock, Germany); Konstanze Schober (University Medical Center Rostock, Germany); Thomas Eickner (University of Rostock, Germany); Niels Grabow (Universität Rostock, Germany)
 
P71 Hydrophilic silicone elastomer with excellent cell adhesion capability - A promising material for ophthalmologic micro-implants
Andreas Brietzke (Rostock University Medical Center, Institute for Biomedical Engineering, Germany); Stefan Siewert and Wolfram Schmidt (Institute for and Biomaterials e.V. Germany); Thomas Stahnke (Rostock University Medical Center, Department of Ophthalmology Germany); Christine Kreiner (KreCo Kreiner Consulting, Germany); Niels Grabow (University Medical Center, Institute for Biomedical Engineering Germany); Rudolf Guthoff (Rostock University Medical Center, Department of Ophthalmology Germany); Klaus-Peter Schmitz (Institute for and Biomaterials e.V. Germany)
 
P72 An Implantable Brain-Computer Interface for Investigation of Novel Closed-Loop Therapies
Martin Schuettler (CorTec GmbH, Germany); Thomas Stieglitz (Albert-Ludwigs-Universität Freiburg, Germany); Christian Stolle, Fabian Kohler and Jörg Fischer (CorTec GmbH, Germany); C. Alexis Gkogkidis (University Medical Center Freiburg & Albert-Ludwigs-University Freiburg, Germany); Xi Wang (University of Freiburg, Germany); Mortimer Gierthmuehlen (University Hospital Freiburg, Germany); Christian Scheiwe (Medical Center – University of Freiburg, Germany); Tonio Ball (Epilepsiezentrum am Universitätsklinikum Freiburg, Germany)
 
P73 Automated particle analysis by Raman microscopy - a method development
Thomas Reske (Institute for and Biomaterials e. V., Germany); Michael Teske (University Medical Center Rostock, Germany); Thomas Eickner (Rostock University Medical Center, Germany); Volkmar Senz, Niels Grabow and Klaus-Peter Schmitz (Universität Rostock, Germany)
 
P74 Foetal heart rate signal spectral analysis by using time-varying autoregressive
Patricio Fuentealba (Otto-von-Guericke University of Magdeburg, Germany & Universidad Austral de Chile, Chile); Alfredo Illanes and Frank Ortmeier (Otto-von-Guericke University of Magdeburg, Germany)
 
P75 Optimization of manufacturing processes for biodegradable polymeric stents regarding improved mechanical properties
Olga Sahmel (University of Rostock, Germany); Daniela Arbeiter (Universität Rostock, Germany); Stefan Siewert (Institute for and Biomaterials e. V., Germany); Kerstin Schümann (Rostock University Medical Center, Germany); Klaus-Peter Schmitz and Niels Grabow (Universität Rostock, Germany)
 
P76 Identification of structurally non-identifiable and sloppy parameters of a detailed ventricular myocyte model
Tobias , Olaf Doessel and Axel Loewe (Karlsruhe Institute of Technology (KIT), Germany)
 
P77 Methodology for the normalization of intraoperative testing results in deep brain stimulation
Dorian Vogel (University of Applied Sciences and Arts Northwestern Switzerland & Linköping University, Switzerland); Shah (University of Applied Sciences and Arts Northwestern Switzerland, Switzerland); Fabiola Alonso (Linköping University, Sweden); Erik Schkommodau (University of Applied Sciences Northwestern Switzerland, Switzerland); Karin Wårdell (University of Linköping, Sweden); Simone Hemm-Ode (University of Applied Sciences Northwestern Switzerland & School of Life Sciences, Switzerland)
 
P78 Fluid-structure interaction in intracranial vessel walls: The role of patient-specific wall thickness

Samuel Voß (University of Magdeburg "Otto von Guericke" & Research Campus STIMULATE, Germany); Sylvia Saalfeld (University of Magdeburg, Germany); Thomas Hoffmann (Otto-von Guericke University Magdeburg, Germany); Gábor Janiga (University of Magdeburg, Germany); Oliver (Otto-von Guericke University Magdeburg, Germany); Philipp Berg (University of Magdeburg, Germany)
 
P79 Hydrogel-based Actuation for Perimodiolar Cochlear Electrode Arrays
Theodor Doll (Medizinische Hochschule Hannover, Germany); Steffen Hadeler and Jan Stieghorst (Hannover Medical School, Germany)
 
P80 Effects of Sterilization Methods on Polycarbonaturethan-co-Silicone for Biomedical Applications
Marcel Ricklefs (Hannover Medical School, Germany); Stefanie Kohse (University Medical Center Rostock, Germany); Lucrezia Morticelli (Hannover Medical School, Germany); Niels Grabow (Universität Rostock, Germany); Axel Haverich (Medizinische Hochschule Hannover, Germany); Sotirios Korossis and Tobias Schilling (Hannover Medical School, Germany); Wolfram Schmidt (Universität Rostock, Germany)
 
P81 Test system for microclimatic properties of medical aids, particularly with regard to body-attached medical aids (KliMed-HM)
Simon Gallinger and Christina Mittag (Technische Universität Berlin, Germany)
 
P82 In vitro study of sirolimus release from nonwoven PLLA matrices
Sabine Illner (Institute for Biomedical Engineering, University Medical Center Rostock, Germany); Stefanie Kohse and Claudia Michaelis (University Medical Center Rostock, Germany); Thomas Reske (Institute for and Biomaterials e. V., Germany); Thomas Eickner (Rostock University Medical Center, Germany); Klaus-Peter Schmitz (Institute for and Biomaterials, Germany); Niels Grabow (Universität Rostock, Germany)
 
P83 Fabrication and Characterization of Bending-Independent Capacitive CMOS Pressure Sensor Stacks
Roland Fischer and Heinrich Ditler (RWTH Aachen University, Germany); Michael Görtz (Fraunhofer IMS, Germany); Wilfried Mokwa (RWTH Aachen, Germany)
 
P84 Classification of thyroid and non-thyroid regions in ultrasound images using Linear Discriminant Analysis
Elmer Jeto Gomes Ataide (Otto-von-Guericke Universität & INKA - Katheter, Germany); Prabal Poudel (Otto-von-Guericke-Universität Magdeburg, Germany); Alfredo Illanes (Otto-von-Guericke University of Magdeburg, Germany); Kreißl (Otto-von-Guericke Universiät, Germany); Michael Friebe (Otto-von-Guericke-Universität, Germany)
 
P85 Model-driven dimensionality reduction of epileptic EEG-data
Dennis Adamski (University of Applied Science Ansbach, Germany); Steffen Hartmann, Christian Uhl and Bastian Seifert (Ansbach University of Applied Sciences, Germany)
 
P86 In vitro investigation of the radial compliance of porcine carotid arteries
Christoph Brandt-Wunderlich (Institute for and Biomaterials, Germany); Olaf Specht (Universität Rostock, Germany); Heinrich Ortmann (University Medical Center Rostock, Germany); Wolfram Schmidt, Niels Grabow and Klaus-Peter Schmitz (Universität Rostock, Germany)
 
P87 Development of a drug-eluting for micro-invasive glaucoma surgery
Stefan Siewert (Institute for and Biomaterials e. V., Germany); Wolfram Schmidt (Universität Rostock, Germany); Sylvia Pfensig (Institute for and Biomaterials e. V., Germany); Stefanie Kohse (University Medical Center Rostock, Germany); Katharina Wulf (Universität Rostock, Germany); Swen Großmann (Institute for and Biomaterials e. V., Germany); Michael Stiehm (University of Rostock & Germany, Germany); Franziska Kopp (University Medical Center Rostock, Germany); Rudolf Guthoff (Universität Rostock & Universitätsaugenklinik Rostock, Germany); Niels Grabow (Universität Rostock, Germany); Klaus-Peter Schmitz (Institute for and Biomaterials, Germany)
 
P88 Didactic Concept to Teach Regulatory Affairs by Means of a Simulation Game
Michael Scholtes, Annemarie Behrend, Stephanie Buedenbender, Volker Gross and Keywan Sohrabi (Technische Hochschule Mittelhessen, Germany)
 
P89 Conceptual design of a personalized radiation therapy patch for skin cancer
Ali Pashazadeh (Otto-von-Guericke-University Magdeburg, Germany); Nathan Castro (Queensland University of Technology & Institute of Health & Biomedical Innovation, Australia); Elena Morganti (Queensland University of Technology, Australia); Sinja Lagotzki and Axel Boese (Otto-von-Guericke-University Magdeburg, Germany); Dietmar W Hutmacher (Queensland University of Technology & Institute of Health & Biomedical Innovation, Australia); Michael Friebe (Otto-von-Guericke-Universität, Germany)
 
P90 Influence of application parameters of ultrasonic-assisted bone instruments on the tear force of a substitute material for spinal dura mater
Marie Foelkel (Hamburg University of Technology, Germany); Vitali Herzog and Markus Meier (Söring GmbH, Germany); Michael Morlock (TU Hamburg-Harburg, Germany)
 
P91 Investigation of avascular tumor-immune system interactions using a CA-PDE model
Jörg Wassenberg and Waldemar Zylka (Westphalian University, Campus Gelsenkirchen, Germany)
 
P92 Adaption of a spike sorting algorithm to ECG signals
Pavel Larionov, Jan-Dirk Janßen and Thomas Schanze (Technische Hochschule Mittelhessen, Germany)
 
P93 Cross-Correlation based comparison between the conventional 12-lead ECG and an EASI derived 12-lead ECG
Melanie Holderith and Thomas Schanze (Technische Hochschule Mittelhessen, Germany)
 
P94 Capacitive ultra-low power ECG measurement system for intelligent clothes
Daniel Laqua (Technische Universität Ilmenau & Institute for Biomedical Engineering and Informatics, Germany); Jakob Reck, David Sambale, Florian Kreische and Marc-Patrick Heppner (Technische Universität Ilmenau, Germany); Peter Husar (Technische Universiät Ilmenau, Germany)
 
P95 Differences between muscle control of computational musculoskeletal models and healthy children during elbow flexion and extension movements
Alberto-Isaac Perez-SanPablo (National Institute for Rehabilitation (INR-LGII) & CINVESTAV, Mexico); Alicia Meneses-Peñaloza (National for Rehabilitation (INR-LGII), Mexico); Elisa Romero Avila (Applied Medical Engineering - AME Helmholtz Institute, Germany); Maria-Elena Arellano-Saldaña (National for Rehabilitation (INR-LGII), Mexico); Catherine Disselhorst-Klug (RWTH Aachen University & Institute of Applied Medical Engineering, Germany); Josefina Gutierrez-Martinez (National for Rehabilitation (INR-LGII), Mexico); Juan-Manuel Ibarra-Zannatha (CINVESTAV, Mexico)
 
P96 Implementation of CGRA based 3D fMRI filter for the Alzheimer disease
Prajakta Rathod and Shailesh Bhalerao (Maharastra, India)
 
P97 Optimisation of enzyme cascades for the in vitro synthesis of hyaluronic acid
Johannes Gottschalk, Anna Eisele and Lothar Elling (RWTH Aachen, Germany)
 
P98 Targeting Galectins - From molecular ligand design to theranostic anti-cancer agents
Dominic (RWTH Aachen University, Germany); Lothar Elling (RWTH Aachen, Germany)
 
P99 Enhancing haptic feedback of subsurfaces during needle insertion
Sven-Thomas Antoni, Stefan Soltau, Jens , Omer Rajput, Christoph Otte, Alexander Schlaefer and Maximilian Neidhardt (Hamburg University of Technology, Germany)
 
P100 Bidirectional data transmission for battery-less medical implants
Özgü Dogan (Micro-and Nanosystems, Pressure Sensor Systems, Fraunhofer IMS, Germany); Andreas Hennig (Fraunhofer, Germany); Alexander Stanitzki (Fraunhofer IMS, Germany); Mario Baum (Fraunhofer ENAS & ENAS, Germany); Anton Grabmaier (University of Duisburg-Essen, Germany)
 
P101 Development of glycan-functionalized microgels for scavenging of Clostridium toxins A and B
Viktoria Heine (RWTH Aachen University, Germany)

 
P102 Development of a textile-integrated, multimodal sensor device for biosignal acquisition
Dominik Granich, Akram Idrissi and Thomas Gries (RWTH Aachen University, Germany); Andreas Blaeser (Institut für Textiltechnik of RWTH Aachen University, Germany)
 
P103 Fabrication of Dental Implant Abutments for Optimized Soft Tissue Integration
Patrick Doll (Karlsruher Institut für Technologie (KIT), Germany); Christoph Semperowitsch and Melanie Haefner (Karlsruhe Institute of Technology (KIT), Germany); Ralf Ahrens (Karlsruher Institut für Technologie (KIT), Germany); Bruno Spindler (Fräszentrum Ortenau GmbH Co. KG, Germany); Andreas Guber (Karlsruher Institut für Technologie (KIT), Germany)
 
P104 Learning motion in non-Cartesian magnetic resonance imaging
Martin A. Koch, Jannis Hagenah, Maximilian Wattenberg and Floris Ernst (University of Lübeck, Germany)
 
P105 Temperature controlled drug release from magnetic PLGA microspheres
Diana Zahn and Andreas Weidner (TU Ilmenau, Germany); Zeynab Nosrati (UBC Vancouver, Canada); Lucas Wöckel (Technische Universität Ilmenau, Germany); Kathy Saatchi (UBC Vancouver, Canada); Urs Häfeli (The University of British Columbia, Canada); Silvio Dutz (Technische Universität Ilmenau, Germany)
 
P106 "MigraineMonitor" - Towards a System for the Prediction of Migraine Attacks using Electrostimulation
Andrea Stefke, Frauke Wilm, Robert Richer, Stefan Gradl, Bjoern M Eskofier, Clemens Forster and Barbara Namer (Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany)
 
P107 A novel test system for the determination of breath-triggered drug release for preterm neonates in real-time
Felix Carl Wiegandt (Fraunhofer Institute for Toxicology and Experimental Medicine, Germany); Ulrich Froriep (Fraunhofer-Institut für Toxikologie und Experimentelle Medizin, Germany); Theodor Doll (Medizinische Hochschule Hannover, Germany); Andreas Dietzel (Technische Universität Braunschweig, Germany); Gerhard Pohlmann (Fraunhofer-Institut für Toxikologie und Experimentelle Medizin, Germany)
 
P108 Development and Validation of a Modular Braiding Core for Semi-Automated Production of Bifurcated Stents on a 3D Braiding Machine
Felix Merkord (Institut für Textiltechnik, RWTH Aachen University, Germany)

 
Standardized technique of water permeability measurement for biomedical applications
Swen Großmann and Stefan Siewert (Institute for and Biomaterials e. V., Germany); Stefanie Kohse (University Medical Center Rostock, Germany); Robert Ott (Institute for and Biomaterials e. V. Rostock - Warnemünde, Germany); Wolfram Schmidt, Niels Grabow and Klaus-Peter Schmitz (Universität Rostock, Germany)
 
P110 Osteofit - Determination of a limit load for the treatment of osteoporosis based on a natural movement of the patient and acoustic emission analysis AEA
Olaf (Technische Hochschule Mittelhessen, Germany); Udo Wolf (University of Applied Sciences Fulda, Germany); Hans-Joachim Schwalbe and Jörg Subke (Technische Hochschule Mittelhessen, Germany)
 
P111 Spinal Monitoring for Emergency Care Training
Björn Krystek (Hamburg University of Applied Sciences, Germany); Marcel Dudda (University of Duisburg-Essen, Germany); Boris Tolg (Hamburg University of Applied Sciences, Germany)
 
P112 Nanofibrous polyamide 6 scaffolds promote adhesion of endothelial cells
Valeria Khaimov (Institute for and Biomaterials & Institute for Biomedical Engineering, Germany); Stefanie Kohse (University Medical Center Rostock, Germany); Daniela Arbeiter and Niels Grabow (Universität Rostock, Germany); Klaus-Peter Schmitz (Institute for and Biomaterials, Germany)
 
P113 Mechanical properties of 3D printed electrode arrays for electrocortical monitoring
Filip Jakimovski (Medical School Hannover, Germany); Jan Stieghorst (Hannover Medical School, Germany); Theodor Doll (Medizinische Hochschule Hannover, Germany)
 
P114 Nanostructuring of Titanium by Anodic Oxidation with Sulfuric and Hydrofluoric Acid
Patrick Doll (Karlsruher Institut für Technologie (KIT), Germany); Monika Wolf and Manon Weichert (Karlsruhe Institute of Technology (KIT), Germany); Ralf Ahrens (Karlsruher Institut für Technologie (KIT), Germany); Bruno Spindler (Fräszentrum Ortenau GmbH Co. KG, Germany); Andreas Guber (Karlsruher Institut für Technologie (KIT), Germany)
 
P115 Visualization of Demodex with polydimethylsiloxane(PDMS) lens-attached mobile phone camera
Jong-Mo Seo, Minwon Seo and Wooram Lee (Seoul National University, Korea)
 
P116 Several Legal and Ethical Issues in Innovative Biomedical Technology
Jong-Mo Seo, Hyoun Jin Kim and Sangwon Lee (Seoul National University, Korea); Meesook Yeo (Hanyang University, Korea)
 
P117 Diffusion and relaxation profiling of skin layers employing the Fourier NMR-MOUSE
Jennifer Flohr (RWTH Aachen, Germany); Christoph Kuppe (University Hospital Aachen, Germany); Christian Rehorn (RWTH Aachen University, Germany); Jürgen Floege (University Hospital Aachen, Germany); Bernhard Blümich (RWTH Aachen University, Germany)
 
P118 The CellDrum and PulSElect system: Tools to evaluate mechanical and pharmacological effects on arterial cells
Robin Bayer (University of Cologne, Germany)

 
P119 Sparse autoregressive of biomedical signals
Thomas Schanze (Technische Hochschule Mittelhessen, Germany)

 
P120 Integrating a Usability Engineering Process into a Consisting Risk Management
Michael Scholtes, Stephanie Buedenbender, Annemarie Behrend, Keywan Sohrabi and Volker Gross (Technische Hochschule Mittelhessen, Germany)
 
P121 Low-cost active knee orthoses - a systematic evaluation
Swantje Janzen and Kent W. Stewart (University of Stuttgart, Germany); Peter P. Pott (Universität Stuttgart, Germany)
 
P122 Proposal of a functional assessment battery for elbow functionality for the design and evaluation of assistive technology for children with spastic cerebral palsy
Alberto-Isaac Perez-SanPablo (National Institute for Rehabilitation (INR-LGII) & CINVESTAV, Mexico); Elisa Romero Avila (Applied Medical Engineering - AME Helmholtz Institute, Germany); Alicia Meneses-Peñaloza and Maria-Elena Arellano-Saldaña (National for Rehabilitation (INR-LGII), Mexico); Catherine Disselhorst-Klug (RWTH Aachen University & Institute of Applied Medical Engineering, Germany); Josefina Gutierrez-Martinez (National for Rehabilitation (INR-LGII), Mexico); Juan-Manuel Ibarra-Zannatha (CINVESTAV, Mexico)
 
P123 Challenges of Medical Device Regulation for Small and Enterprises
Thomas Schanze and Marcel Vila Wagner (Technische Hochschule Mittelhessen, Germany)
 
P124 Electrode model and simulation of catheter ablation of supraventricular tachycardia
Karl Ehret (University of Applied Sciences Offenburg, Germany); Matthias Heinke (University of Applied Sciences Offenburg & Department of Electrical Engineering and Information Technology, Germany); Johannes Hörth (University of Applied Sciences Offenburg, Germany)
 
P125 Registration of pre- and postoperative surface scans for pediatric neurosurgery
Manuel Katanacho and John-Certus Lack (Fraunhofer Institute for Production Systems and Design Technology IPK, Germany); Felix Fehlhaber (Fraunhofer-Institute for Production Systems and Design Technology IPK, Germany); Jörg Krüger (Fraunhofer IPK, Germany)
 
P126 Computational comparison of different textile implants to correct apical prolapse in females
Aroj Bhattarai and Manfred Staat (FH Aachen University of Applied Sciences, Germany)
 
P127 Extended CT Hounsfield values scale as a method to improve radiotherapy for patients with active and metallic implants
Zehra Ese (MR GmbH, Germany)

 
P128 Microplastic extraction from biological materials - a possible extraction method
Folker Wenzel, Andreas Fath and Adriano Monteleone (Hochschule Furtwangen, Germany)
 
P129 Digital products and processes in dental technology
Eva Rothgang (Ostbayerische Technische Hochschule, Germany); Michael Wehmöller (Hochschule Osnabrück, Germany)
 
P130 Next Generation of Bio-Analyzer: Autofluorescence Analyzer NADHJA®
Bernd Lecher (mfd Diagnostics, Germany)

Information for Abstracts and Papers Submission

Conference Topics

  • Artificial Intelligence and Deep Learning
  • Augmented and Virtual Reality
  • Biohybrid Medical Systems
  • Biomaterials and Biocompatibility
  • Biomechanics
  • Biomedical Micro and Nano Systems
  • Biosensors and Bioanalytics
  • Biosignal Processing
  • Cellular-, Tissue- and Bioengineering
  • Clinical and Ambulatory Monitoring
  • Clinical Engineering
  • Computer Assisted Surgery
  • Cyber Medical Systems
  • Digital Operating Room
  • Medical Technology and Society
  • First-in-Human-Trials
  • Image Processing
  • In vivo-Imaging
  • Intelligent Assistance Systems
  • Laboratory Diagnostics and POCT
  • Medical Automation Technology
  • Medical Decision Support
  • Medical Implants
  • Medical Information Systems and Management
  • Medical Lasers
  • Medical Wearables
  • Microscopy
  • Minimal Invasive Surgery
  • Modelling and Simulation
  • Nanomedicines and Theranostics
  • Neurotechnology
  • Optics and Medicine
  • Model Guided Therapy
  • Precision and Personalized Medicine
  • Rehabilitation Technology and Prosthetics
  • Regulatory Affairs, Quality Management, Ethics
  • Radiotherapy
  • Surgical Navigation and Robotics
  • Telemedicine, eHealth, mHealth, Home Care
  • Training and Education
  • Usability, Risk Management, Patient Safety


      

>> SUBMIT YOUR ABSTRACT VIA EDAS <<

DGBMT Students Competition

The DGBMT asks students for presenting their results from research projects or diploma theses. The best contributions are awarded certificates and prizes (posters and oral presentations in a separate process).

1. Prize: 1000 EUR

2. Prize: 300 EUR

3. Prize: 200 EUR

 

Places 1 - 10 each receive a copy from the textbook series Biomedical Engineering.

 

The submissions are subject to the same peer review process and will undergo an additional evaluation based on quality, of innovation and presentation of the scientific-technical work.

 

The best 10 papers are assessed by the jurors during the running sessions of the BMT conference and the winners determined. The other finalists receive a participation certificate.

 

Conditions of participation:

Only first authors are admitted who while writing their scientific study presented in the paper

  • are or were at the time enrolled as a student at a university,
  • are younger than 30 years on the last day of the conference and
  • a member of the DGBMT (or of one of the two affiliate societies in Austria or Switzerland; in the first year DGBMT membership is free for students.)

When submitted dissertations of participants shall not yet have been finished. This means that scientific assistants, doctoral students and Ph.D. students are allowed to take part if they fulfill these requirements. Please note that the final papers must have been finished when submitted.

A submission application (application form) and an informal letter of recommendation (application endorsement for participation in the student competition) written for instance by a university lecturer or professor supervising the thesis or dissertation shall be submitted in electronic form (PDF document) together with the paper (conference paper). The paper shall present only current research work which may have been terminated not more than one year before the deadline for submission. In the absence of supporting the participant will be eliminated.

 

Preparation of the paper:

Papers for the DGBMT student competition may be submitted as a presentation or a poster the assignment of which is in the hands of the conference scientific advisory board. In the case of the submitted paper shall refer only to the personal contribution of the author.

The submitted paper (conference paper) for the DGBMT student competition should not exceed a maximum of 4 pages (PDF document, no password protection) and may be written in German or English.

Please use the binding structuring and formatting templates (available below) for conference papers. The submission of papers (PDF document without password protection) is by means of a web-based manuscript handling system.

 

Abstract and Paper Submission

All abstracts will be peer-reviewed and if accepted published online in a supplement issue of the journal ‘Biomedical Engineering / Biomedizinische Technik’ by De Gruyter. The published abstracts will be available online on the De Gruyter website (free access).

In addition, authors are invited to submit an optional conference paper (2 – 4 pages). The conference paper will be peer-reviewed and if accepted published online in the open access journal “Current Directions of Biomedical Engineering” by De Gruyter. Accepted conference papers will be available online on the De Gruyter website (open access).

    

ATTENTION: The use of the appropriate templates is mandatory.

  • Both abstracts or conference papers will be accepted if the template format was used accurately.
  • No editorial or layout changes can be done by the publishing after publication. By submitting your abstract and paper in English you accept the terms of the respective copyright agreement.
  • Abstracts have to be uploaded as file.
  • Papers prepared in Word have to be uploaded as word AND pdf file in EDAS.
  • Papers Prepared in LaTex have to be uploaded as file in EDAS.

Important Dates for Authors

ActionDate
Deadline of submission of unstructured abstracts (Deadline extended):April, 22nd, 2018
Deadline of submission of conference papers (Deadline extended)April, 22nd, 2018
Notification of both, unstructured abstracts or conference papers:June 15th, 2018
Deadline for revised conference paper submission:June 30th, 2018

Templates for Authors

Fallback Word

BMT Abstract template

Publishing date: 2018-02-08
WORD-Template: 20 KB
Fallback Word

Application form for student competition

Publishing date: 2018-03-28
WORD-Template: 116 KB

BMT Paper Template

Publishing date: 2018-02-08
WORD-Template: 190 KB
Fallback ZIP

Author Sample Proceedings DeGruyter LaTeX

DeGruyter Publishing House
Publishing date: 2018-01-29
ZIP: 1.8 MB

Authors Statement

Publishing date: 2018-01-30
PDF: 395 KB

License to Publish

DeGruyter Publishing House
Publishing date: 2018-01-29
PDF: 408 KB